Product Categories
- Wall Socket&Switch
- Smart WiFi Indoor Bulb
- Zigbee 3.0 Smart Home
- SELF POWERED SWITCH
- Smart WiFi Wall Switch
- Smart WiFi Wall Socket
- Smart WiFi Power Strip
- Smart WiFi Mini Plug
- Smart WiFi Waterproof Socket
- Smart WiFi Safety Sensor
- Smart WiFi IR Remote Control
- Smart WiFi Camera
- Smart WiFi Water Valve
- Smart WiFi Temperature Controller
A water immersion sensor that detects water leakage in the environment in real time. When water immersion is detected, the detector sends an alarm signal to the gateway and reports the information to the user's mobile phone.
Communication Mode | ZigBee |
Dimension | ø50X18mm |
Operating Temperature | -10~55℃ |
Power Supply | DC 3V(CR2032) |
Material | Fireproof PC+ Fireproof ABS |
Installation | Flat |
Waterproof level | IP66 |
Adopt integral structure waterproof design, convenient and quick installation
Low battery indication function
Low power consumption microprocessor, long standby
Send status report to the gateway periodically
Network settings
1. Turn on the product.
Insert a thin blade or coin into the slot on the battery compartment cover and turn counterclockwise to open it.
Remove the battery insulation film to turn on the product power and close the battery cover.
2. Press and release the reset button 5S, the green LED will flashes for network settings.
Distribetion network hint:
Press the reset button for 5 to 10 seconds, the green LED lights once
The green LED goes out, release the reset button, green the LED flashes, indicating that you are ready for network settings.Blinks for 20 seconds during network setup.After more than 10 seconds, the network settings are canceled.
The green LED indicator will light up for 5 seconds to indicate the network settings success, if it fails, the green LED goes out.
Installation Instructions
Place the product in the detection area.
Toxic or harmful substances or elements this product
Warranty Certificate
Warranty policy:
1. If the product has quality problems within 7 days after payment On the date, you can apply for a refund based on the invoice price, or you can
2. If the product has quality problems within 15 days after payment, please replace it with the same model or repair it.
Date, you can apply to replace the product with the same model or the following model Repaired.
3. If the product has quality problems within 12 months after warranty,On the payment date, you can apply for repairs.
This warranty does not include:
1. The product owner has no warranty certificate or warranty
The service has expired.
2. Damage caused by improper use, maintenance or storage.
3. Damage caused without Tuya's disassembly and repair.
Authorization
4. Damage caused by force majeure
5. The product will change color and depreciate normally after used
- Prev:None;
- Next:none;